Payal Irrigation Private Limited

Electrofusion End Caps consist of Standard Electrofusion Coupler and a Spigot End Cap. Our Electrofusion fittings are suitable for permanently connecting MDPE 80 and PE 100 pipes, both in straight as well as coil form.

Additional Information:

• Production Capacity: 500
• Delivery Time: 1-2 Day if it is in stock
• Packaging Details: BOX

An electrofusion tapping saddle is used to tap into a HDPE pipeline, electrofusion tapping saddle fittings come in SDR 11 (which also suits SDR 13.6 & SDR 17). Electrofusion tapping saddle fittings are made from PE100 material with a precisely moulded energising coil of wire, ensuring uniform melting for a strong electrofusion joint and the minimisation of welding and cooling times.

Available Size:

• 3/4", 1", From 40 x 20 mm to 250 x 63 mm

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1-2 Day if it is in stock

An alternative form of welding polyethylene (poly or PE) is the Electrofusion system where we embed heating elements in PE fitting sockets. These sockets form part of other fitting or coupling and require an electrical input from a welding machine to produce a welded joint.

]A 90⁰ electrofusion elbow is used to join two lengths of poly pipe on an angle of 90 degrees. Electrofusion elbow 90⁰ fittings are also used to join a long spigot fitting to a piece of pipe around a 90⁰ corner.

Size Range:

• 20mm to 315mm

Additional Information:

• Production Capacity: 500
• Delivery Time: 1-2 Day if it is in stock

An alternative form of welding polyethylene (poly or PE) is the Electrofusion system where we embed heating elements in PE fitting sockets. These sockets form part of other fitting or coupling and require an electrical input from a welding machine to produce a welded joint.

The large selection of high quality joining systems ( spigot fittings and Electrofusion), accessories, machines, tools is representative of a solution and an informed approach for high-pressure systems to our customer needs.

An Electrofusion fitting is made of a polyethylene body to embed wire coils and terminals at the stage of manufacturing. The coil is heated which is then transferred to the fitting and pipe when charged through the terminals with the Electrofusion control unit.

The resulting pressure and heat cause the surface to melt and bond at the molecular level. There is no separation between pipe and fitting at the fusion point if the procedure is correct.

Additional Information:

• Production Capacity: 500/Day
• Delivery Time: 3-4 Day if it is in stock

Electrofusion couplings are fittings used for joining polyethylene water and gas pipes. The electrofusion fittings are made of high-density, to ensure that the internal layer of the fitting and external layer of the pipe are welded together”

Size Range:

• 20 mm to 315 mm

Additional Information:

• Production Capacity: 500 / Day
• Delivery Time: 3-4 Day if it is in stock

An alternative form of welding polyethylene (poly or PE) is the Electrofusion system where we embed heating elements in PE fitting sockets. These sockets form part of other fitting or coupling and require an electrical input from a welding machine to produce a welded joint.

The large selection of high quality joining systems ( spigot fittings and Electrofusion), accessories, machines, tools is representative of a solution and an informed approach for high-pressure systems to our customer needs.

An Electrofusion fitting is made of a polyethylene body to embed wire coils and terminals at the stage of manufacturing. The coil is heated which is then transferred to the fitting and pipe when charged through the terminals with the Electrofusion control unit.

The resulting pressure and heat cause the surface to melt and bond at the molecular level. There is no separation between pipe and fitting at the fusion point if the procedure is correct.

Size Range:

• 63mm to 110mm

Additional Information:

• Production Capacity: 1000 / Day
• Delivery Time: 1-2 Day if it is in stock

We are engaged in offering a distinguished range of HDPE Electrofusion Fittings. Electrofusion welding is a form of resistive implant welding used to join pipes. Resistive heating of the coils melts small amounts of the pipe and fitting, and upon solidification, a joint is formed. It is most commonly used to join polyethylene (PE) and polypropylene (PP) pipes

Additional Information:

• Production Capacity: 1000 / Days
• Delivery Time: 1-2 Day if it is in stock

We are engaged in offering a distinguished range of HDPE Electrofusion Fittings. Electrofusion welding is a form of resistive implant welding used to join pipes. Resistive heating of the coils melts small amounts of the pipe and fitting, and upon solidification, a joint is formed. It is most commonly used to join polyethylene (PE) and polypropylene (PP) pipes

Available Size: 

• 3/4" and 1"

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1-2 Day if it is in stock

pipe saddle pvc

pipe saddle tee